Connecting to Various Devices
Connecting the Power Cord (supplied)
After all devices have been connected, connect the supplied power cord.
1
Power cord (supplied)
● Since the power requirement of the projector is high, please insert the power plug directly into a wall outlet.
● When not using devices, remove the power plug from the wall outlets.
● Do not use power cords other than those supplied.
● Do not use a power voltage different from that which is indicated.
● Do not cut, tear or modify the power cords. Also, do not put a heavy object on, heat, or stretch the power cords, otherwise they
may be damaged.
● Do not insert or pull out the plugs with a wet hand.
24
1.
2.
2
Cautions Against Fire and Electric Shock
Lens Cap
Connect the supplied power cord to the power in-
put terminal of the projector
Insert the main plug of the supplied power cord into
the wall outlet
(e.g.)
When using the projector, remove the Lens Cap
• Be sure to fit the lens cap on when the projector is not in use
to keep out dirt.
• Do not project with the lens cap attached. The lens cap may
be deformed by heat or this may cause malfunction.