4.7 Keyboard
5. Lift the upper side of the keyboard and turn it face down on the palm rest.
6. Remove the following screws securing the keyboard support plate and remove the
keyboard support plate.
M2.5x8.0B
7. Disconnect the keyboard cable from the connector CN3200 on the system board.
8. Remove the keyboard.
Keyboard support plate
Keyboard cable
4-22
[CONFIDENTIAL]
FLAT BIND screw
CN3200
Figure 4-10 Removing the keyboard
4 Replacement Procedures
x2
M2.5x8.0B FLAT BIND
Keyboard
QOSMIO G20 Maintenance Manual (960-511)