Buttons - Pfaff creative 2.0 Owner's Manual

1
2
3
4
5
6
7
8

Buttons

Needle up/down with indicator (1)
Press this button to move the needle up or down.
The set ting of the needle stop po si tion is changed
at the same time. When needle down is activated,
the indicator is lit, the needle will stop in the down
position and the presser foot will raise to pivot
height.
You can also tap the foot control to raise or lower
the needle.
Stitch restart (2)
When having stopped sewing in the middle of
a stitch, press stitch restart to start sewing at the
beginning of the stitch again without having to
reset any special settings you have made.
If pressing the stitch restart button while sewing,
the stitch will be nished and the machine will
then stop.
Speed control (3)
Press the speed button to sew at a slower speed.
An icon on the graphic display will indicate how
slow your machine will sew. Long press the speed
button and use the wheel (16) to change the sewing
speed.
Note: You cannot select a higher speed than the default
speed.
Thread snips with indicator (4)
Press the button when you are not sewing and
your sewing machine cuts the top and bobbin
threads and raises the presser foot and the needle.
To cut before the needle moves to the start position
of the next stitch, press the thread snips button
while sewing. The thread snips indicator will be lit.
2:12
9 10 11 12 14 13 15 16
19 20 21 22 23 24 25
Start/stop (5)
Press this button to start or stop the machine
without using the foot control. Press the button
once to start and press it again to stop.
Reverse (8) with indicator (6)
For permanent reverse, press the button
before starting to sew. The reverse indicator (6)
will be lit and the machine sews in reverse until
you press the button again to cancel.
If you press the reverse button while sewing, the
machine sews in reverse for as long as you keep the
button pressed. The reverse indicator is lit when
the reverse button is pressed.
Reverse is also used when sewing buttonholes,
programmed tie-off end, darning stitches and
tapering stitches to step between the parts of the
stitch.
Programmed tie-off indicator (7)
The programmed tie-off indicator is lit to indicate
that one or several tie-off options are activated. The
indicator stays lit until the tie-off options are no
longer in use.
Immediate tie-off (9)
Press the tie-off button while sewing and your
machine sews a few tie-off stitches and stops
automatically.
Presser foot up and extra lift toggle (10)
Raises the presser foot and needle to the up
position. Press the button once more and the
presser foot will raise to extra lift.
17 18
26 27 28