Table of Contents
Advertisement
Charging the handset
3. If you are charging the battery for the first time, place the handset on the base to
charge for at least 24 hours continuously.
4. When the handset is fully charged,
other end of the telephone line cord (make sure that one end is already plugged into
the base) into the telephone wall socket.
NOTE
You cannot access the battery in the handset. Do not attempt to remove the battery, as
you may damage the phone. If you need to replace the battery, contact the customer
service helpline found in this user guide.
Connecting the handset and charger
(for multi-pack only)
If you have purchased a multiple pack, you will need to carry out this process for all the
handsets and chargers.
1. Plug the power adapter into the socket marked
the other end into an electrical outlet.
2. If you are charging the battery for the first time, place the handset on the charger to
charge for at least 24 hours continuously.
3. When the handset is fully charged,
display will show
to the base.
BATTERY LOW WARNING
If you hear a warning beep every 2 minutes during a call, you will need to recharge the
handset before you can use it again.
When charging,
BATTERY PERFORMANCE
In ideal conditions, fully charged batteries should give up to 7 hours talk time or up to 130
hours standby time on a single charge.
8
Handset
and handset number (e.g. 2) to indicate that it is registered
icon will scroll on the display.
1
icon will appear steady on the display. Plug the
on the rear of the charger and plug
icon will appear steady on the display. The
Getting started
Advertisement
Table of Contents
