KTM 990 Adventure EU Owner's Manual page 154

COOLING SYSTEM
A 0 0 A
Condition
The front side cover has been removed.
–
Ensure that the drain plug on the radiator and the water pump cover are tightened.
–
Remove bleeder screw
100613-10
–
Position the vehicle as shown and secure it against rolling. Height difference
be reached.
Guideline
Height difference
Info
To make sure that all of the air can escape from the cooling system, raise the
front of the vehicle. A poorly bled cooling system is less effective at cooling and
the engine can overheat.
400663-10
.

50 cm (19.7 in)

152
must
