KTM 990 Adventure EU Owner's Manual page 146

ELECTRICAL SYSTEM
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the programming key.
All black ignition keys are deactivated.
–
Order a new black ignition key according to the key number on the KEYCODECARD
and activate it.
Activating the ignition key:
–
Turn the emergency OFF switch to the position
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
FI Warning lamp
Immobilizer indicator lamp
–
Switch off the ignition by turning the orange programming key to the OFF position
–
Pull out the programming key.
–
Insert the black ignition key in the ignition lock.
–
Switch on the ignition by turning the black ignition key to the position ON
FI Warning lamp
Immobilizer indicator lamp
again.
–
Switch off the ignition by turning the black ignition key to the position OFF
–
Remove the black ignition key.
–
To activate further ignition keys, repeat the last 4 steps with the respective ignition
key.
–
Insert the orange programming key in the ignition lock.
–
Switch on the ignition by turning the orange programming key to the ON position
FI Warning lamp
.
(MIL) lights up, switches off, and then starts to flash.
lights up.
(MIL) lights up, switches off, and then starts to flash.
lights up, switches off briefly, and lights up
(MIL) lights up, switches off, and then starts to flash.
144
.
.
.
.
.
.