Power; Number Buttons; Tune; Input - JVC I'Art Pro 1204TNH-II-IM User Manual

Button Functions

Power

Turns the TV on or off.
Press the P
Number Buttons - 10Key Pad
Use the number buttons on the remote control to move directly to a specific channel. For
example, to move to channel 12:
0 (Zero)
1 (One)
2 (Two)

Tune

Lets you decide the input channel and select it. After you press the number buttons on the
remote, press the T
1 (One)
2 (Two)
Press the T

Input

Selects the signal input source for the television: Input-1, 2, 3, 4 DIGIATL-IN or i.LINK for
video devices like VCRs, DVD players or camcorders.
Press the I
By every press of the I
Notes:
• When you return to TV mode, press the R
• You can also access the FRONT CONTROL PANEL screen by using the M
the front of the TV instead of the remote control. It appears between INITIAL SETUP and
PICTURE ADJUST screen, and it has INPUT, VIDEO STATUS and ASPECT menus. Choose
INPUT by pressing M
√
buttons ( OPERATE
• i.LINK can be selected only when you have an i.LINK device connected.
Channel +/–
Use these buttons to move up or down all the available channels your TV is able to receive.
Volume +/–
Use these buttons to raise or lower the TV's volume level.
62
button
OWER
button. For example, to move to channel 12:
UNE
button
UNE
button
NPUT
button, you can change the input mode.
NPUT
† on the front panel and choose a mode by using the C
ENU
®
).
+ button or direct 10 key pad.
ETURN
button on
ENU
+/-
HANNEL