Oil Replacement - Suzuki RM125 Owner's Service Manual

17-6 REAR SUSPENSION
• Install the dust seals.
NOTE:
When installing the dust seal, the stamped mark A on the dust
seal must face inside.
• Apply grease to the needle roller bearings and install them.
• Apply grease to the dust seals and spacers.
• Install the spacers A and B.
A for Right side
B for Left side
 99000-25010: SUZUKI SUPER GREASE "A"

OIL REPLACEMENT

TOOLS AND EQUIPMENT
• Following tools and equipment are required to perform oil
replacement.
1 Screwdriver or small punch
2 Vise*
3 Drain Pan
4 Oilcan
5 Beaker
6 Specified Shock Oil (SS25)
* Not Shown in the illustration
(or equivalent grease)
7 Rags
8 Nitrogen tank
9 Filler Hose and Nozzle
0 Regulator Assembly
A Owner's Service Manual