Toshiba E-studio 352 Operator's Manual page 269

RFC related
Error code Problem
2500 Syntax error, com-
mand unrecognized:
HOST NAME error
(RFC: 500), Destina-
tion mail address error
(RFC: 500), Terminal
mail address error
(RFC: 500)
2501 Syntax error in param-
eters or arguments:
HOST NAME error
(RFC: 501), Destina-
tion mail address error
(RFC: 501), Terminal
mail address error
(RFC: 501)
2503 Destination mail
address error
(RFC: 503)
2504 HOST NAME error
(RFC: 504)
2550 Destination mail
address error
(RFC: 550)
2551 Destination mail
address error
(RFC: 551)
2552 Terminal/Destination
mail address error
(RFC: 552)
2553 Terminal/Destination
mail address error
(RFC: 553)
Check if the Terminal mail address and Destination mail address
are correct.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
Check if the Terminal mail address and Destination mail address
are correct.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
Check if the mail server is operating properly.
Turn the power OFF and then back ON, and perform the job in
error again.
If the error still occurs, contact your service representative.
Check if the Destination mail address is correct. Check the sta-
tus of mailbox access restriction, etc. on the mail server.
Check the Destination mail address. Check if the mail server is
operating properly.
File is too large for mailbox. Confirm the mailbox size on the mail
server. Transmit again in text mode or with a lower resolution. If
the error still occurs, divide the document and transmit again.
Check if there is an illegal character in the mailbox in the mail
server.
What to do
8
267