Toshiba E-studio 352 Operator's Manual page 113

Number of punch holes and available paper sizes
Since the number of punch holes and the distance between the holes vary depending on the country/
region, purchase a hole punch unit that meets your requirements. (For details, consult your service techni-
cian.)
MJ-6004E
(Japan and most of Europe)
MJ-6004N
(North America)
MJ-6004F
(France)
MJ-6004S
(Sweden)
MJ-6101E
(Japan and most of Europe)
MJ-6101N
(North America)
MJ-6101F
(France)
MJ-6101S
(Sweden)
Manual stapling (MJ-1101 only)
The manual stapling function which enables you to use the staple function without making copies is avail-
able in the optional Finisher (Type B) (MJ-1101). This function is useful when copies are made without sta-
pling being set or when you want to staple originals.
A: Stapling position lamps
B: [Stapling position] button
A
1
Press the [Manual-stapling] button.
The shutter in the paper exit area is opened.
Number of punch holes
and hole diameter
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
2 holes
(6.5 mm dia.)
2/3 holes switchable
(8.0 mm dia.)
4 holes
(6.5 mm dia.; 80 mm pitch)
4 holes
(6.5 mm dia.; 70 mm and 21
mm pitch)
C: Manual-stapling lamp
D: [Manual-stapling] button
B C D
Available paper sizes
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT-R, COMP
A4-R, B4, B5, B5-R, FOLIO, LD, LG, LT,
LT-R, COMP, A3, A4
2 holes: A4-R, LG, LT-R
3 holes: A3, A4, LD, LT
A3, A4, LD, LT
A3, A4, A4-R, B4, B5, B5-R, FOLIO, LD,
LG, LT, LT-R, COMP
3
111