Remote Control - Pioneer VSX-D209 Service Manual

QQ
3 7 63 1515 0

Remote Control

1
2
D. ACCESS
TOP MENU
3
4
5
SORROUND
6
CH. SELECT
7
TE
L 13942296513
8
9
1 SOURCE
(Power) button
This button turns on/off the power for PIONEER
components connected to the VSX-D209/VSX-D209-G.
2 NUMBER/PLAYER COMMAND buttons
Use to select the radio frequency in tuner mode. Also, you
can use to contol PIONEER components like CD players,
cassette decks, etc. according to the comands printed
above the button (4, 3, 7, etc.)
3 D.ACCESS/TOP MENU button
This button gives you direct access to radio frequency
input, allowing you to input a station directly. In DVD mode
this button brings you to the top menu.
4 TEST TONE button
Use this button to hear a test tone from each speaker in
turn to set the relative speaker volumes. Also switches the
BAND in TUNER mode.
www
5 SURROUND button
Use this button to set up the surround sound features of the
VSX-D209/VSX-D209-G. In particular, it's used to select
the type of center mode, turn on/off subwoofer option and
.
select delay time for each speaker. Also used to start the
process of setting the effect levels
http://www.xiaoyu163.com
SOURCE SELECT
SOURCE
DVD CD TUNER
TV CONT. TAPE MD CD-R
$ $ ! !
1 2 3 4
TV FUNC.
@ * & #
5 6 7 8
TV VOL. CHANNEL
EFFECT STATION
9 0
CLASS
MENU
FQ
ENTER
TEST MPX
TONE SET UP
FQ
2
DSP MODE MUTING
LEVEL
FL MASTER
RECEIVER FUNCTION
DIMMER VOLUME
AV MULTI-CHANNEL RECEIVER
Î
REMOTE CONTROL UNIT
x ao
y
i
http://www.xiaoyu163.com
8
2
6
button
Use to select a Dolby Pro Logic mode. Also used to access
Test Tone.
7 CH. SELECT button
Used to start the process of setting the speaker levels (see
$ below).
0
8 RECEIVER STANDBY/ON button
Use to switch the receiver between on and standby modes.
9 FUNCTION button
Use select the playback or recording source.
0 SOURCE SELECT keys
-
Use to put the remote control (NOT the receiver) in the
stated mode.
=
~
- CHANNEL/STATION +/– buttons
!
Use to select the station of memorized frequencies or
change channels on Pioneer-made TVs.
@
= CLASS/MENU button
#
Use to switch between the three banks (classes) of station
$
memories.
~ 2 3 5∞ ( FQ +/–) & ENTER buttons
Q Q
3 6 7 1 3
Use these arrow buttons when setting up your surround
% sound system. These buttons are also used to control DVD
menus/options and for deck 1 of a double cassette deck
^
player. The FQ +/- buttons can be used to find radio
frequencies.
! MPX/SETUP MODE button
Use to switch between auto stereo and mono reception of
FM broadcasts. If the signal is weak then switching to
MONO will improve the sound quality. In DVD mode this
button brings up the SETUP menus.
@ DSP MODE button
Use to switch between the various DSP modes available
(HALL, JAZZ, DANCE, THEATER1, THEATER2) and DSP
off. Use to create different surround sound effects from any
stereo source.
# MUTING button
Use to mute all audio without affecting any of the current
sound settings.
$ +/– LEVEL buttons
Use to set the relative speaker volumes for all the speakers
in your system (see 7 above).
% MASTER VOLUME +/– buttons
Use to set the overall listening volume.
^ FL DIMMER button
Use this button to make the fluorescent display (FL) dimmer
or brighter. There are three brightness settings as well as an
off setting.
u163
.
VSX-D209, VSX-D209-G
2 9 9 4 2 8
1 5 0 5 8 2 9 9 4
m
co
9 9
2 8 9 9
51