Table Of Contents - Leupold RCX Trail Camera System User Manual

Contents
Introduction .......................................................................................................... 3
Things you need to get started ............................................................................ 4
Controller Setup ................................................................................................... 5
Camera Setup ..................................................................................................... 10
Battery Guideline ............................................................................................... 11
Camera Operation Setup .................................................................................... 12
Camera Setup with Preset Modes ...................................................................... 13
DST (Dual Sensor Technology) ........................................................................... 14
Camera Mounting .............................................................................................. 15
Custom Camera Setup ........................................................................................ 18
Using an External Power Source ........................................................................ 21
Downloading Images .........................................................................................22
Troubleshooting ................................................................................................. 24
2
Introduction
The RCX Trail Camera System is
designed to support the use of many
cameras and a single controller. The
camera system is simple, high quality,
and durable so you can place many
cameras in the field, and quickly and
easily access them to change setups,
use Real Time Video Alignment and
TM
to download images. The system works
by the camera capturing images and
storing them on an SD card that you
install. The controller also takes an SD
card up to 32 GB.
When you connect the controller to the
camera with the USB cable, you can
download images from the camera to
the controller with just a couple of quick
menu selections. You are then able to
view the images right there in the field
and make any changes to the setup you
want. The controller also allows you to
view photos from other brand trail
cameras when the SD cards are
inserted. The camera can be aligned
using Real Time Video Alignment™ that
permits you to see what the camera
sees. Settings can also be changed to
get more or less images by selecting one
of 4 preset modes, or you may access
the powerful custom menu for settings
such as multipicture, event delay, time
lapse, etc. See "Custom Camera Setup"
on page 18 for more information.
3