Leupold RCX Trail Camera System User Manual page 14

3. Check the camera lens window to see if it is dirty. Clean if needed with a soft
cloth or a cotton swab with alcohol or lens cleaning fluid applied. DO NOT USE
ACETONE OR ANY OTHER SOLVENT. DOING SO WILL DAMAGE THE VIEWING
WINDOW AND VOID YOUR WARRANTY.
My pictures are black & white and overexposed.
1. Check the light sensor to and make sure it is unobstructed. The light sensor
is located on the front of the camera, on the left side, just above the Leupold
medallion. If it is obstructed, the camera will set itself to always take night
pictures.
My camera is taking the correct type of images in day or night only but
not both?
1. Verify that you entered both day and night settings for the menu items that
allow this.
26
My flash range is getting shorter over time.
1. The RCX Camera System is designed to reduce IR LED power when the batteries
get low in order to extend the life of the batteries. To restore a longer flash
range, install fresh batteries.
My camera is not taking night pictures or videos.
1. Use Energizer Ultimate Lithium batteries or an external power source when
taking night video or when using the 48 LED setting in the RCX-2.
2. When batteries get very low, The RCX Trail Camera is designed to take only day
pictures in order to extend the useful life of the batteries. Replace the batteries
to restore full functionality.
27