Downloading Images - Leupold RCX Trail Camera System User Manual

camera by opening the rubber sealed
12V jack cover. Be sure to connect the
red clamp to the positive (+) terminal
and the black clamp to the negative (-)
terminal.

Downloading Images

From the Camera to the Controller
Connect the controller to the camera
with the USB cable. Select the
"Download Images from Camera"
icon and press . The next menu will
show you two options: "Download"
which downloads the photos and leaves
them on the camera, or "Download
and Delete" which downloads the
photos and deletes them from the
camera. Once one of the options is
selected, press . The controller will
begin downloading and will show a
22
count of how many images there are to
download and the percent complete. If
it appears downloading is going to take
longer than you want to wait, open the
bottom door and remove the SD card.
Insert it into the controller for viewing
and sorting the images, or change SD
cards and wait until you get home to
view the images. Select the "View SD"
icon to view images stored on the SD
card installed in the controller.
Downloading Images from the
Controller to the Computer
Plug the USB into a computer and view
the images taken on a computer screen.
The controller acts as an external drive
and allows you to move files from the
controller to a computer in the same
way.
Viewing Images on a TV
Plug the USB cable into a TV or any
other device with a USB port that
supports mass storage devices and use
the TV controls to navigate through
the images to view them on the TV.
Viewing Images on SD Cards from
Other Cameras.
The controller can be used to view any
images in the field that are stored on
an SD card using the industry standard
DCIM file storage format. Simply
insert the SD Card from another brand
camera, and select the "View
SD" icon.
23