JUKI DDL-5530N Handbook page 167

Pinpoint Saddle Stitching Machine
MP-200
In addition to balloon-stitching (to produce seams with a hand-stitched
touch), smooth sewing of chain-off stitches, and other outstanding
sewing capabilities of the highly regarded Columbia 100, the MP-200
achieves a minmun needle gauge of 1.2mm for wider applicability.
The machine head of the MP-200 is modeled after JUKI's lockstitch
machine head to provide a wider area under the arm and optimize
operability. In addition, the simply designed mechanisms of the
machine head greatly facilitate maintenance works such as timing
adjustments.
The feed pitch can be reduced as desired by using the lever during
sewing. This allows the operator to control the locations of the needle
entry points on material edges.
SPECIFICATIONS
Model name
Max. sewing speed
Thread take-up
Needle bar stroke
Stitch length
Lift of the presser foot
Needle width
Needle
(at the time of delivery)
Distance from needle to machine arm
Lubrication
Lubricating oil
NEEDLE WIDTH
The needle width of MP-200 is factory-adjusted to 1.6mm
at the time of delivery.
The setting can be chose to 1.2mm or 2.0mm by changing
number of spacer gauges as shown in the below.
A single MP-200 supports these three needle width.
USES OF PINPOINT STITCHING
Men's coats and jackets
1 Topstitching on front facing
2 Star-shape tacking at the far side of front facing, star-shape tacking on front body
(for preventing uneven material feed)
Slacks
1 Topstitching on front pocket mouths and left top-center plait
2 Side topstitching
Miscellaneous
1 Topstitching on collars of coats, ladies' cut and sewn garments, knit shirts, etc.
2 Topstitching on top-center plaits of coats, ladies' wear, shirts, etc.
3 Various kinds of topstitching on coats, ladies' wear, shirts, etc.
(The needle width can be chose by changing number of spacer gauges.)
Needle
Looper
MP-200
2,000rpm
Link type, thread take-up
24.3mm
3 7 stitches/inches (3.5 8.5mm)
Reverse feed stitching is disabled.
By hand: 5.5mm, By knee: 12mm
1.2mm, 1.6mm, 2.0mm
SCHMETZ 29-C-150 (#90) #80 #140
SCHMETZ 29-C-151 (#100) #80 #140
265mm
By an oiler
JUKI New Defrix Oil No.1 (equivalent to ISO VG7)
Needle width Number of spacer gauges
1.2mm
1.6mm
2.0mm
3
MP-200
1
2
1
2
3
1
1
2
1
2
MP-200 (June, 2001) 1/1
10