Tv Speaker; Audio Out - JVC HD-52G566 User Manual

Initial Setup

TV Speaker

If your TV is connected to a stereo system, you can turn off the TV speakers and listen to the
audio through your stereo.
Press the M
To TV SPEAKER
π †
è
To turn the TV's speakers ON or OFF
Press the MENU button when finished
Notes:
• Before you turn the TV speaker setting from OFF to
ON, make sure that the TV volume level is low! If
the TV volume is set too high, the sound level will be
extremely loud.
• After a power interruption, the TV speaker settings will return to "ON".

Audio Out

If your television is connected to an external speaker source, audio out gives you the option of
controlling the volume level with your TV's remote control.
Press the M
To AUDIO OUT
π †
è
To VARI or FIX
Press the M
VARI: Lets you adjust the volume of the external
speakers using the V
remote control.
FIX: The volume of the external speakers is adjusted
using the audio device's remote control.
Note:
• After the TV has been turned off, the sound from the audio out terminal continues to output
sound for 5 seconds. After 5 seconds, it stops outputting sound.
48
button
ENU
button
ENU
button when finished
ENU
+/– buttons on your TV's
OLUME
INITIAL SETUP
PREVIOUS
TV SPEAKER
AUDIO OUT
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
NEXT PAGE
SELECT OPERATE
INITIAL SETUP
PREVIOUS
TV SPEAKER
AUDIO OUT
DIGITAL-IN
DIGITAL-IN AUDIO
CENTER CH INPUT
NEXT PAGE
SELECT OPERATE
ON
VARI
AUTO
AUTO
OFF
(1/4)
EXIT
MENU
ON
VARI
AUTO
AUTO
OFF
(1/4)
EXIT
MENU