NEC Univerge SV8100 Features And Specifications Manual page 1266

Issue 5.0
Multiple Logon
With Version 3000 or higher software, the same user name and password can be assigned to multiple
extensions when using Automatic or Manual Registration. This makes it easier on the user by only
having to remember one password. For example, if a user has an IP Multiline terminal, MH240 handset,
and uses Desktop Applications with the Enhancement bundle controlling the IP Multiline, three different
ports are used in the system. Prior to Version 3000, each IP port required a unique user name and
password. With Version 3000 all three can be assigned the same user name and password.
Conditions
If a 3rd-Party CTI connection is used on the SV8100, the Override function for IP multiline

terminals and softphones is not supported.
The Bluetooth Cordless Handset (BCH) is not a supported terminal when using 1st-Party

CTI, 3rd-Party CTI, or with the Desktop Suite.
SV8100 Desktop Applications do not support Secondary Incoming Extensions.

A maximum of 128 Desktop Applications connections is supported. Any 1st-Party CTI over

ethernet connection takes away from the 128 maximum connections.
The UNIVERGE SV8100 does not support Network Address Translation (NAT). Because

of this, any IP multiline terminal or Desktop Application must appear to be on the same
network as the SV8100 VoIP Interface (IPLA). For remote Desktop Applications, like
SP310 soft phone, this can be achieved by a VPN connection to the network the SV8100
resides on.
The Desktop Applications require a ADA-L Adapter installed on the multiline terminal with

connection directly to the client PC for Call Recording and Personal Greeting voice
functions when running in deskset mode.
With Version 1100 or lower software, the CD CP00 US must be licensed for a IP Terminal

license for each Desktop Application whether it is running in deskset or softphone mode.
With Version 2000 or higher software, the CD CP00 US must be licensed for either a IP

Terminal license or a IP Terminal Softphone License.
The CD-CP00-US must be licensed for an SIP Client for each Desktop Applications

whether it is running in deskset or softphone mode.
If a Desktop Application is run in Deskset (CTI) mode and the system capacity is maxed

out, the desktop does not launch.
The Microsoft Outlook Add-in also uses an IP Terminal license for each Add-in used. If the

PC is already tied to a license via a softphone, Desktop Client, or Desktop Client with
Shared Services, an additional SIP Client license is not required.
Desktop Application users cannot dial digits while a call is in progress.

2 - 1240
UNIVERGE SV8100
SV8100 Desktop Applications