Replacing A Hot-Swap Fan - IBM xSeries 346 Hardware Maintenance Manual And Troubleshooting Manual

5. Connect the power cord to a properly grounded electrical outlet.
6. Make sure that the dc power LED and ac power LED on the power supply are

Replacing a hot-swap fan

The following notes describe information that you must consider when installing a
hot-swap fan.
Attention:
possible.
v The server supports a maximum of 12 hot-swap fans.
48
xSeries 346 Types 8840 and 1880: Hardware Maintenance Manual and Troubleshooting Guide
The following illustration shows the power-supply connectors on the back of the
server.
TX/RX LINK TX/RX LINK
lit, indicating that the power supply is operating correctly.
To ensure proper server operation, if a fan fails, replace it as soon as
Power supply 2
power cord connector
Power supply 1
power cord connector