Advanced Wireless - D-Link DWR-113 User Manual

Section 3 - Configuration
Advanced Wireless contains settings which can negatively affect the performance of your router if configured improperly. Do not change
these settings unless you are already familiar with them or have been instructed to make the change by one of our support personnel.
Beacon Interval:
Transmit Power:
RTS Threshold:
Fragmentation:
DTIM Interval:
WMM Capable:
TX Rates:
D-Link DWR-113 User Manual

Advanced Wireless

Beacons are packets sent by an Access Point to
synchronize a wireless network. Specify a value.
100 is the default setting and is recommended.
Set the transmit power of the antennas.
This value should remain at its default setting of
2347. If inconsistent data flow is a problem, only
a minor modification should be made.
The fragmentation threshold, which is specified
in bytes, determines whether packets will be
fragmented. Packets exceeding the 2346 byte
setting will be fragmented before transmission.
2346 is the default setting.
A Delivery Traffic Indication Message (DTIM) is a countdown informing clients of the next window for listening
to broadcast and multicast messages. The default interval is 3.
WMM (Wi-Fi Multimedia) is QoS (Quality of Service) system for your wireless network. Enable this option to
improve the quality of video and voice applications for your wireless clients.
Select the basic transfer rates based on the speed of wireless adapters on your wireless network. It is strongly
recommended to keep this setting to Auto.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
33