D-Link DWR-113 User Manual page 25

Section 3 - Configuration
Wireless Channel:
Visibility Status:
Security Mode:
D-Link DWR-113 User Manual
Indicates the channel setting for the
DWR-113. By default the channel is set
to 11. This can be changed to fit the
channel setting for an existing wireless
network or to customize your wireless
network. Click Auto Channel Scan
to automatically select the channel
that it will operate on. This option is
recommended because the router
will choose the channel with the least
amount of interference.
Select Invisible if you do not want the
SSID of your wireless network to be
broadcasted by DWR-113. The SSID
of your router will not be seen by Site
Survey utilities. Therefore while setting
up your wireless clients, you will have
to manually enter your SSID to connect
to the router.
WIRELESS SECURITY MODE
This device supports three wireless security modes, WEP, WPA-Personal, WPA-Enterprise or None. WEP
is the original wireless encryption standard. WPA provides a higher level of security and WPA-Personal
does not require an authentication server. When WPA enterprise is enabled, the router uses EAP (802.1x) to
authenticate clients via a remote RADIUS server.
Click Save Settings to save your changes, or click Don't Save Settings to discard your changes.
21