Frame And Customer Control Panel Installation - Panasonic PT-53WX52F Service Manual

F
RAME AND
Note: Handle the PTV screen by holding it by its frame. Avoid scratching the delicate plastic screen.
Follow the procedure below to assemble the PTV screen and control panels to the cabinet.
1. Hold the screen assembly by its sides. Align
the sides of the PTV screen frame with the
cabinet. Lift and slightly tilt the screen and
place it over the front top edge of the cabinet.
Straighten the screen to a vertical position and
lower it until it locks into place. Screw the
Screws (3)
Control Panel
K & G Boards
Service Manual
C C
USTOMER
(
56WX MODELS ONLY
Figure 9. Frame and Customer Controls Panel Installation.
P
ONTROL ANEL
)
bottom edge of the screen frame to the
cabinet with 3 screws as illustrated in figure 9.
2. Attach the control panel to the cabinet and
PTV screen using 3 screws, as illustrated in
the figure 9.
3. Connect the K & G boards cables to the
proper connectors.
Screws (3)
Front Wood Filler (L)
- 14 -
I
NSTALLATION