Convergence Alignment; Convergence Alignment Template - Panasonic PT-53WX52F Service Manual

The convergence alignment template is a grid
approximately the size of the viewing screen used to
ensure the proper size and shape of the alignment
rasters. It is 6 blocks across by 6 blocks high. The grid
dimensions vary with the mode of operation.
Apply a convergence alignment template to the
viewing screen of the PTV. Make sure the center lines
are properly aligned. If a template is not available, one
can be created by following the instructions below.
Create a convergence alignment template by
drawing a pattern, as in figure 6, in the actual
dimensions on transparent film or tracing paper. Start
with the Horizontal and Vertical Center Axis and work
outwards until the pattern is complete. Pay attention to
the actual dimensions of the pattern.
Grid specifications 53" Models
Mode
480i
1080i
Zoom
Template Dimensions:
Grid specifications 56" Models
Mode
480i
1080i
Zoom
Template Dimensions:

Convergence alignment template

Horizontal Vertical
48.6mm 22mm
45.2mm 23.5mm
48.7mm 28.82mm
1173mm v660 mm
Horizontal Vertical
51.5mm 27.3mm
47.9mm 24.9mm
48.7mm 28.82mm
1240mm v698mm
Note: The convergence alignment templates, part
number TXFQD01FSER
TXFQD04ESER1 for 56", are available through
Matsushita/Panasonic Services.
3 2
3
2
1
Center
1
2
3
Figure 6. Convergence adjustment grid
Important note:
In order to prevent any possible damage on the
PRT's (burning), do not keep the PTV turned on,
after you realize the adjustment.
- 11 -
for 53"
Center
1
2
1
Service Manual
and
3