Advertisement
USING THE MP3 PLAyER wITH yOUR HEADSET
Your SCALA RIDER headset can be connected to an MP3 player/au-
dio device by simply plugging it to the Clamp's jack with the MP3
cable as follows:
1. Power on the headset to have it on Standby mode, flashing
slowly in Blue.
2. Connect one side of the MP3 cable
to your MP3 player/audio device's
jack and the other side to the Helmet
Clamp's jack as shown in the photo.
3. Operate the MP3 Player/audio device
by using its buttons (FF/REW/PLAY/
PAUSE).
NOTE: Volume can only be adjusted through the MP3 Player.
Any other audio connection (Phone call/FM Radio/Intercom call)
will automatically mute the MP3 Player/Audio device's signal.
The audio signal will return only when headset is once again in
Standby mode.
SUPPORT
For additional information please visit our website at
www.cardosystems.com
FAQ: www.cardosystems.com/faq
or contact us at:
support@cardosystems.com
Phone:
Connect the MP3 cable to the
Clamp's jack
USA and Canada – + 1-800-488-0363
International – +4989 450 36819
Audio & Microphone User Guide
Advertisement
