Using The Timers - JVC RS-WP1WT Instructions Manual

Using the Timers

TIMER
TIMER
CLOCK TIMER ON/OFF
STAND BY/ON
CLOCK
SLEEP
DOWN
DOWN UP SET
PROGRAM
UP
RANDOM
AUTO
PRESET
REPEAT
TUNER
AUX C D TAPE
BAND
FM MODE
REVERSE MODE REW MULTI CONTROL FF
DISPLAY
BASS/
TREBLE
AHB PRO
VOLUME
RM-SRSWP1U REMOTE CONTROL
The timers let you control listening and recording functions
automatically.
Setting the Clock
When you supply the power using one of the following ways, the
"CLOCK" indicator blinks and "AM12:00" appears on the display.
You need to set the clock.
• Plugging the AC adaptor into the wall outlet
• Loading 8 batteries into the Unit
• Connecting car battery (DC12V)
Use the Remote Control to set the clock.
Notes:
• The clock must be correctly set for the timers to work.
The procedure must be completed within two minutes.
•
Otherwise, the setting is cleared and must be repeated from the
beginning.
CLOCK
DOWN UP
1. Turn on the System.
2. Press the CLOCK button on the Remote
Control.
The time indication blinks on the display.
3. Press the UP or DOWN button to set the time.
Press the UP or DOWN button to increase or decrease the time.
Pressing and holding the button will change the time rapidly.
4. Press the SET button.
The selected time is set and the seconds start counting from 0.
Then, the display returns to the original one.
CAUTION: If no battery is loaded in the unit and it
left with the AC adaptor unplugged (or when there
is a power failure) for more than 5 minutes,
CLOCK indicator will blink on the display. Set the
current time (clock) again.
TIMER ON/OFF
SET
SLEEP
SET
ON time/OFF time indicator
TIMER indicator
CLOCK indicator
TIMER REC
indicator
CLOCK
ON
REC SLEEP
OFF
ON time, OFF time, Source, Volume
When the System is in use, the display shows other items as well.
For simplicity, we show here only the items described in this section.
Setting the Timer
Once you have set the Timer, the timer will be activated at the same
time every day, except for the Tuner REC timer which is used to
record a broadcast on the tape. It can be cancelled and reactivated
whenever you wish.
The Timer indicator ( ) on the display shows when the Timer you
have set is in effect.
Use the Remote Control to set the Timer.
Note:
Perform each setting within 30 seconds. Otherwise, setting is cleared
and the procedure must be repeated from the beginning.
1. Turn on the System.
2. Setting the ON time (Example: AM11:15).
1. Press the TIMER button on the Remote Control.
The Timer indicator ( ) and "ON" indicator light up and the
current ON time blinks on the display.
ON
2. Set the ON time by pressing the UP or DOWN button.
Pressing and holding the button will change the time rapidly.
ON
3. Press the SET button.
The current OFF time blinks on the display.
OFF
(To be continued on the next page)
SLEEP indicator
17