Removal Procedure
7.5
Removal of Electrical Box / PCB
Warning
* Remove the back
cover.
* Disconnect the fan
motor connector.
1. Disconnecting the
faston terminal
(1) Disconnect the
terminal located at
left.
(2) Disconnect the
terminal located at
right.
2. Removing the
electrical box
(1) Remove the 2 screws
from the front bottom.
52
Be sure to wait 10 minutes or more after turning off all power supplies before
disassembling work.
Procedure
SiBE81-623A
Points
* The screws are M4×12
in size. (The other
ones are M4×16.)
Use regular length of
screws.
Photocatalytic Air Purifiers