Ibm 7014 Model S25 Rack; Ibm 7014 Model T00 Rack - IBM Power 710 Technical Overview And Introduction

Remember: A new Power 710 or Power 730 server can be ordered with the appropriate
7014 rack model. The racks are available as features of the Power 710 and Power 730 only
when an additional external disk drawer for an existing system (MES order) is ordered. Use
the rack feature code if IBM manufacturing has to integrate the newly ordered external disk
drawer in a 19-inch rack before shipping the MES order.
If a system is to be installed in a non-IBM rack or cabinet, ensure that the rack meets the
requirements described in 1.10.10, "OEM rack" on page 21.
Remember: It is the client's responsibility to ensure that the installation of the drawer in the
preferred rack or cabinet results in a configuration that is stable, serviceable, safe, and
compatible with the drawer requirements for power, cooling, cable management, weight,
and rail security.

1.10.1 IBM 7014 Model S25 rack

The 1.3 Meter (49-inch) Model S25 rack has these features:
25 EIA units
Weights
– Base empty rack: 100.2 kg (221 lb.)
– Maximum load limit: 567.5 kg (1250 lb.)
The S25 racks do not have vertical mounting space that will accommodate #7188 PDUs. All
PDUs required for application in these racks must be installed horizontally in the rear of the
rack. Each horizontally mounted PDU occupies 1U of space in the rack, and therefore
reduces the space available for mounting servers and other components.

1.10.2 IBM 7014 Model T00 rack

The 1.8 Meter (71-in.) Model T00 is compatible with past and present IBM Power systems.
The T00 rack has these features:
Thirty-six EIA units (36 U) of usable space.
Optional removable side panels.
Optional highly perforated front door.
Optional side-to-side mounting hardware for joining multiple racks.
Standard business black or optional white color in OEM format.
Increased power distribution and weight capacity.
Support for both ac and dc configurations.
The rack height is increased to 1926 mm (75.8 in.) if a power distribution panel is fixed to
the top of the rack.
Up to four power distribution units (PDUs) can be mounted in the PDU bays (Figure 1-4 on
page 17), but others can fit inside the rack. See 1.10.7, "The ac power distribution unit and
rack content" on page 16.
Weights:
– T00 base empty rack: 244 kg (535 lb.)
– T00 full rack: 816 kg (1795 lb.)
Chapter 1. General description
15