Be4/5 Gearbox – Checks And Adjustments; Principles Of Adjusting The Gear Controls - CITROËN 2002 BERLINGO Technical Information

BE4/5 GEARBOX – CHECKS AND ADJUSTMENTS

Principles of adjusting the gear controls.

WARNING : Cables should be adjusted each time the gearbox,
gear controls or power unit are removed.
Principles.
Lock the gear lever in neutral position,using tool:
9607-T.
Place the gearbox in neutral.
Couple the cables on the lever.
Fit the ball-joints on the gearbox lever.
Lock the cable lengths with the ball-joint locking
keys.
Engines : NFV - 6FZ - RFN - RFS - WJY – RHY - RHZ
WARNING : Do not use any tool to unclip the
ball-joints.
To unlock the ball-joint, press at the centre "a",
then pull the ball-joint upwards.
NOTE : Changing an individual ball-joint is
possible as long as the locking key is removed.
Unclip at "b", using two small screwdrivers.
187
SAXO - XSARA - XSARA PICASSO
B2CP3BXC B2CP3BYC