MAINTENANCE WORK ON CHASSIS AND ENGINE
Removing the lower triple clamp
9.31
–
Remove screws
Info
Do not unplug the CDI control unit.
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
500099-10
Do not bend the cables and lines.
–
Remove o-ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
500100-10
(EXC EU, EXC AUS, XC‑W ZA)
x
–
Remove the fork legs. (
–
Remove the headlight mask with the headlight. (
–
Dismount the front fender. (
–
Remove screws
Info
Do not unplug the CDI control unit.
–
Remove screw
and place it on one side.
Info
Protect the motorcycle and its attachments from damage by covering them.
500149-10
Do not bend the cables and lines.
–
Remove protector ring
–
Remove the lower triple clamp with the steering stem.
–
Remove the upper steering head bearing.
500150-10
and hang the CDI control unit to the side.
. Remove screw
, take off top triple clamp with the handlebar
. Remove protector ring
.
p. 42)
p. 47)
and hang the CDI control unit to the side.
. Loosen screw
. Take off top triple clamp with the handlebar
.
p. 47)
44