Securing An Infant - Britax B-SAFE User Manual

Securing Your Child

Securing an Infant

IMPORTANT: Ensure that you have followed all instructions for
installation and adjustment of the harness and buckle into the
correct position for your child.
• Loosen the harness by
pressing down the harness
adjuster lever while pulling
both harness straps forward.
• Press the tab and pull apart
the two halves to release the
chest clip.
• Unbuckle the harness by
pressing the red release
button and pulling the tongues
from the buckle and opening
the chest clip by squeezing
the release in the center and
pulling the two halves apart.
32
• Place the child in the infant car
seat as shown.
• Position the harness straps
around the child.
• Buckle the harness by
inserting one buckle tongue at
a time into the buckle.
* Connection is confirmed with
an audible click after inserting
each buckle tongue.
* Always pull on the buckle to
ensure it is properly connected.
• Fasten the chest clip by
sliding the two halves together
until a click is heard.
Securing Your Child
Slouching
Sitting Up
33