Attaching The Car Seat; Removing The Car Seat - Britax B-SAFE User Manual

Installing the Base

Attaching the Car Seat

• Ensure that the base is
securely installed.
• Place the infant car seat into
the base and press down until
a click is heard.
• Pull up on the infant car seat
to verify attachment.
• Ensure that the carry handle
is in one of the three locked
positions.

Removing the Car Seat

• Pull and hold the release lever
on the back of the infant car
seat.
• Lift the infant car seat up from
the base.
20
Uninstalling the Base
• For LATCH install, press the
adjuster release button on the
LATCH connector strap and
loosen the strap.
• Press each of the red release
buttons on the LATCH
connectors and pull them off
of the vehicle anchors.
• Store the LATCH connectors
in the storage slots in the base
until reinstalling.
• For Lap-shoulder and lap belt
installations, open the lock-off
to release the vehicle belt.
• Unbuckle the vehicle belt and
pull the belt from the base belt
guides.
Uninstalling the Base
21