Battery Compartment Door Lock - Siemens Behind-the-Ear Hearing Instruments User Manual

Hide thumbs

Table Of Contents

Table of Contents

Enlarged version

To remove the audio input shoe, hold the BTE with one hand

and the audio shoe with the other hand. Gently pull the audio

shoe off, guiding it from the underside towards the gold

contacts. Close the audio input flap.

ATTACHMENT METHOD 2:

Attaching and removing the audio input shoe (Fig. 17):

To attach an audio input shoe, open the battery compartment

to the first catch.

1. Hook the audio input shoe in from the front.

2. Gently press it into place until the audio shoe presses

against the underside of the hearing instrument.

3. The audio input shoe is now in place.

Fig. 17: Method 2-Attaching the audio input shoe

Note: When controlling your Siemens hearing instruments with

an audio input shoe attached to one or both hearing

instruments, the memory button on the remote control

or on the instruments will not change programs. It can

be used to select the audio mode only (audio input only,

microphone only, or mixed mode) if programmed accordingly

by your Audiologist or Hearing Care Provider (not applicable

for Motion and Siemens Explorer). The volume can be changed

using the volume control wheel or the remote control.

OPERATING YOUR HEARING INSTRUMENT-

OPTIONAL FEATURES

To remove the audio input shoe, press it toward the front of

the hearing instrument and gently unhook it.