filename[F:\#SONY\#PS2\#2004.July\#UK\0707_2\SCPH70002\SCPH70002\0000000011SCPH70002\01GB04GET.fm]
01GB01COV.book Page 12 Wednesday, July 7, 2004 3:28 PM
Connecting digital audio
equipment
By using a commercially available optical digital cable, you can enjoy
surround sound with the effect of being in a movie theatre or a concert hall.
When connecting the console to audio equipment with digital connectors,
refer to the instructions supplied with the device to be connected.
Connected device
DIGITAL IN
OPTICAL
Notes
• If you connect the console to audio equipment using an optical digital cable, it may
affect the audio output of some PlayStation
no sound is produced. If this happens, use a cable such as the supplied AV Cable
(integrated audio/video) and connect it to the console's AV MULTI OUT
connector. Do not use an optical digital cable.
• After connecting digital audio equipment, set "Digital Out (Optical)" to "On" in the
System Configuration menu. For details, see "Digital Out (Optical)" (
12
Connecting digital audio equipment
Console rear
Commercially available optical
digital cable
2 format software with the result that
®
Connecting the controller
1
Insert the Analog Controller (DUALSHOCK
port of the console.
MEMORY CARD
Note
Some software titles designate a specific controller port to be used. Refer to the
instructions supplied with the software for details.
page 37).
masterpage:Left
2) into a controller
®
Console front
Analog Controller
(DUALSHOCK
2)
®
model name1[SCPH-70002/SCPH-70003]
[2-187-122-21(1)]