Sony PlayStation 2 Instruction Manual page 10

filename[F:\#SONY\#PS2\#2004.July\#UK\0707_2\SCPH70002\SCPH70002\0000000011SCPH70002\01GB04GET.fm]
01GB01COV.book Page 10 Wednesday, July 7, 2004 3:28 PM
Caution
If you display a still image on a plasma or projection* TV screen for an extended
period of time, "ghosting" may occur. This is a characteristic of these types of
TVs. Static, non-moving images, such as console setting menus, DVD menus or
paused images, may leave a faint image permanently on the TV screen if left on
for an extended time. Refer to the instructions supplied with your TV for details.
* except those of LCD screen types.
Note
The console can be connected to a VCR or an integrated TV/VCR. Note, however,
that if you play a DVD with copy-protection encryption, picture quality may be
reduced.
10
Connecting to a TV
Connecting to a TV with a Euro-AV connector
using the Euro-AV connector plug (SCPH-70003)
Connect your PlayStation 2 console to the Euro-AV connector (SCART)
®
on the TV using the Euro-AV connector plug and AV Cable (integrated
audio/video), making sure you match the colour-coded plugs of the AV
Cable to the matching jacks of the connector plug.
Euro-AV
connector plug
To Euro-AV
connector
AV Cable (integrated audio/video)
After connecting
Set your TV to the appropriate video input mode. Refer to the Instruction
Manual of your TV.
model name1[SCPH-70002/SCPH-70003]
masterpage:Left
Console rear
To AV MULTI
OUT connector
[2-187-122-21(1)]