Checking Coolant Level - Vetus M2.02 Operation Manual

6 Maintenance

6 Checking coolant level

• Check the coolant level in the header tank.
This has to be checked when the engine is
cold.
• Remove the cap of the filler neck on the
heat exchanger.
W
arning
Never open the cap on the header tank when
the engine is at operating temperature.
42
COOLANT
1 cm
( 3 / ")
8
7 Coolant level
The level of the coolant must be approx. 1 cm
(3/8") below the lower edge of the filler neck.
n
ote
For a keel-cooled version, see page 19.
If a water heater is connected, see page
and 21
Checking coolant level
COOLANT
8 Topping up coolant
• If necessary, top up.
The internal cooling system can be filled with
a mixture of anti-freeze (40 %) and tap water
(60 %) or with a special coolant. For specifica-
tion, see page 109.
Never fill the cooling system with sea water or
20 brackish water.
Daily, before starting.
C
aution