Table of Contents
Advertisement
HOW TO USE
CAUTION: Moving parts. Make sure on/off switch is in off position before plug-
ging in.
A carpet should be cleaned regularly over heavily traveled areas, and once a week over
the entire carpeted area. Vacuum slowly, making several passes (forward and backward)
over the carpet, covering small areas at a time. The time required to clean the carpet will
depend on several factors–including type of carpet and amount of dirt.
1
Connect Hose
4
Store Tools
Crevice Tool
HEPA Filter
(on some models)
6
Push ON/OFF Switch
(A thermostat automatically shuts the
motor off if it overheats, see Automatic
Motor Shut-Off)
ON/OFF Switch
6
Rotate Swivel Hook to
Rotate Swivel Hook to
2
release cord
release cord
3
Plug In
Swivel Hook
5
Attach Carrying Strap (on some
models)
The carrying strap has two safety
pin type closures at each end.
Fasten each one into the holes
shown below on the cleaner.
Advertisement
Table of Contents
