User Selection Screen - IBM Professional Series User Manual

To reach the System Options screen from the Function Menu
screen, type a "2" to choose the "Update SYSTEM
Options" function and press ENTER. After doing so, you
see the System Options screen.
The 370 Processor Control Session enables a skilled user to
manipulate the internal registers, the memory, and the state
of the 370 processor inside your system. This screen gives
you a means of preventing users of the system from
accidentally damaging their data by improperly using the 370
Processor Control Session.
Type a Y for Yes or an N for No and press ENTER.
User Selection Screen
The User Selection screen is the first of a sequence of
screens that are used to collect parameters that are different
for each user of the system.
To reach the User Selection screen from the Function Menu
screen, type a "3" to choose the "Update USER
Configuration" function and press ENTER. After doing so,
you see the User Selection screen.
This screen allows you to add or delete users from the system
and to specify the parameters of the 370 virtual machine
each user will experience.
The User Selection screen contains a list of all the USERIDs
currently listed in the Configuration file. If you are
processing the Configuration file supplied with the VM/PC
system, there will be two users listed. They are CMS and
SAMPLE. Place the cursor next to the user you wish to
modify / display / delete, or place the cursor on the top line
next to "ADD new user" to add a user, then press ENTER.
Notice that function key F3 will return you to the Function
Menu.
There are five screens that are used to collect parameters for
an individual user. To explain the use of these screens, we
will assume the use of the Configuration file supplied with
VM/PC. The next five sections of this chapter will take you
through each of the screens.
Chapter 3. Configuring Your VMjPC System
3-11