Cp Commands; Format Of Cp Commands; Summary Of Cp Commands - IBM Professional Series User Manual

CP Commands
Format of CP Commands
The command formats are described in alphabetical order
except for special characters such as the asterisk
(*)
and the
pound sign
(#),
which appear first.
The command formats are presented in the following order:
1. Command Name: Identifies the name of the command
2. Description of Function: Describes the use
3. Syntax: Lists the syntax of the command with all the
possible operands that you can use
4. Operand Description: Describes the function of each
operand and any values that you can include in the
operand
5. Usage Notes: Contains notes about special uses of the
command, its operands, or combinations of commands
or operands.
6. Responses: Describes the CP responses sent to the
terminal, caused by execution of the command. These
responses are command responses and are not to be
construed as VM/PC system messages. The command
responses are not prefixed and, therefore, they are not
contained in Chapter 8, "VM/PC Messages" on page
8-1.
Note: The execution of certain commands may produce
system messages. Refer to Chapter 8, "VM/PC Messages"
on page 8-1 for information on system message formats and
user action.
Summary of CP Commands
The following is a brief description of all the commands
acceptable to the CP component of the VM/PC system.
Chapter 7. VM/PC Commands 7-7