Broan Elite E64000 Series Installation Instructions Manual page 5

1. SELECT BLOWER OPTION
The Broan Elite E64000 Series range hood includes many configurations: hoods with single or double internal blowers (included with the
hoods), or hoods using external blowers. For hoods using external blowers, the Broan Elite E64000 Series must be installed with in-line
blower models HLB3, HLB6, HLB9 or HLB11, or exterior blower model 331H, 332H, 335 or 336 only. Other blowers cannot be substituted.
(Blowers sold separately).
Plan where and how the ductwork will be installed.
If installing in-line blower, refer to instructions packed with in-line blower and follow steps 1, 2, 3, 4, 9 and up of this manual.
Install proper-sized ductwork, elbows and roof or wall cap for the type of blower you are installing. If using 7", 8" or 10" round ducts, use a
transition (internal blower(s) only). Use 2" metal foil duct tape to seal duct joints.
We recommend to install the hood at a minimum distance of 24" from an electric range and at 30" from a gas range.
Distances over 30" are at the installer and users discretion.
Roof cap
Wall
cap
HH0085A
SINGLE INTERNAL BLOWER
Exterior blower
HH0087A
MODEL 331H, 332H, 335 OR 336
EXTERIOR BLOWER TYPICAL DUCTWORK
3¼" x 10" duct
or 7" or 8" round duct
3¼" x 10" to 7" or
3¼" x 10" to 8" transition
(if using round duct)
Hood
24" minimum above
cooking surface
(30" for gas range)
TYPICAL DUCTWORK
10" round duct
Hood
24" minimum above
cooking surface
(30" for gas range)
Roof cap
Wall
cap
HH0086A
DOUBLE INTERNAL BLOWERS
TYPICAL DUCTWORK
10" round duct (except
HLB3, 8" round duct)
In-line blower
24" minimum
above cooking
surface
(30" for gas range)
HH0092A
MODEL HLB3, HLB6, HLB9 OR HLB11
IN-LINE BLOWER TYPICAL DUCTWORK
5
10" round duct
4½" x 18½" to 10"
transition
Hood
24" minimum above
cooking surface
(30" for gas range)
Roof cap
Wall
cap
Hood