Ricoh MLP150DN Operaing Instructions page 126

6. Replacing Consumables
7. Align the new transfer unit with the shaft.
8. Return the purple lever back in place ( ), and then lock the transfer unit ( ).
6
9. Put the old transfer unit into the bag that the new transfer unit was in.
This completes transfer unit replacement. Leave the right cover open, and replace the fusing unit as
shown below.
• If you cannot return the purple lever to its original position, raise the purple lever and remove the
transfer unit. After that, try to install the transfer unit again.
124
BEK163S
BEK164S