Radio Reception - JVC RC-EX20A Instructions Manual

RADIO RECEPTION

Tuning in a station
1 Press BAND/TUNER to enter the tuner mode.
2 Press BAND/TUNER to select the band, FM or
AM.
3 Press and hold 4 or ¢ for more than 1 second.
The unit starts searching and stops when a station of
sufficient signal strength is tuned in.
If you press 4 or ¢ briefly and repeatedly, the
frequency changes step by step.
4 Adjust the volume.
Changing the FM reception mode
When an FM stereo broadcast is hard to receive or noisy,
reception improves in monaural reception.
Press FM MODE so that the MONO indicator
appears in the display window.
To restore the stereo effect, press FM MODE again so
that the MONO indicator goes off.
FM MODE
Note:
The FM reception mode setting will be canceled when
you tune in another station.
4 1,2
PUSH
DISPLAY
Using the antennas
FM
AM
Note:
The built-in ferrite core antenna may pick up interference
from television receivers in the neighborhood disturbing
AM reception.
3
PUSH
DISPLAY
12