Radio Reception - JVC RC-EZ38S Instructions Manual

RADIO RECEPTION

Tuning in a station
1 Press TUNER/BAND to select the band, FM or
AM.
You can press TUNER on the remote control unit to
select the band.
2 Press and hold 4 or ¢ for more than 1
second.
The unit starts searching and stops when a station of
sufficient signal strength is tuned in.
If you press 4 or ¢ briefly and repeatedly,
the frequency changes step by step.
3 Adjust the volume.
Changing the FM reception mode
When an FM stereo broadcast is hard to receive or noisy,
reception improves in monaural reception.
Press MENU/FM MODE.
STEREO indicator appears in the display window.
Press the button again to show MONO indicator in
the display window.
Select either mode for a better reception.
MENU/
FM MODE
Main unit
Note:
The FM reception mode setting may be canceled when
you tune in another station.
Using the antennas
FM
16
2 1 3
MENU/
FM MODE
Remote
2
STANDBY /
ON
CD
RANDOM
MUTING
1
4
7
9
REMOTE CONTROL UNIT
AM
Note:
The built-in ferrite core antenna may pick up interference
from television receivers in the neighborhood disturbing
AM reception.
Changing the AM tuning interval
The unit's default tuning interval for AM stations is 9
kHz/step. You can change this setting when using the
unit in an area where the frequency allocation for AM
stations is 10 kHz/step.
To switch the AM tuning interval
1 Turn the unit on to clock mode.
2 Press MEMO/FM MODE twice, to enter AM set
mode.
The following indication is displayed.
AM SET
MODE:9K/10K
The number that is flashing
is the one that is set.
3 Press 4 or ¢ to select 9K or 10K.
4 Press STOP/ENTER.
1 2 3
MENU/
/ TAPE FM MODE
TUNER/
USB BAND
STOP/
ENTER
PROGRAM /
REPEAT
PRESET
SLEEP EQ
2 3
5 6
8
VOL
0
RM-SRCEZ38 A