Direction Settings - Binding Position; Despeckle - Konica Minolta bizhub C360 User Manual

6
6.3.3

Direction Settings - Binding Position

Select the binding position of the original when it has punched holes or is stapled. When a double-sized orig-
inal is scanned, the binding position is corrected on the back side.
Item
[Auto]
[Top]
[Left]
6.3.4

Despeckle

Reduces the influence of a dirt of the slit glass upon the scanned image when loading an original in the ADF.
Reference
- Specifying Despeckle will drop the scanning speed.
- If the slit glass is too dirty, clean it. For details, refer to the [User's Guide Copy Operations].
6-20
Description
Sets the binding position to the long side if the size is 11-11/16 inches (297 mm) or
smaller, or the short side otherwise.
Select this setting if the original is loaded with the binding position at the top.
Select this setting if the original is loaded with the binding position at the left.
Original Settings
bizhub C360/C280/C220 (Version 3)
6.3