The Abs Anti-Lock Braking System; Emergency Braking Assistance System; Cancelling The Memorised Speed; Changing A Memorised Speed - PEUGEOT 406 Owner's Manual

124
CRUISE CONTROL
Cruise control enables the vehicle to
maintain a steady
grammed by the driver, regardless of
the road characteristics and without
the driver having to touch the accel-
erator or brake pedals.
In order for it to be memorised, the
vehicle speed must be greater than
approximately 25 mph (40 km/h).
Operation
Place switch 1 in the ON position.
A speed can be memorised.
Place switch 1 in the OFF position
to cancel.
Memorising a speed
As soon as you reach the chosen
speed, press button 2 or 3. This
memorises the speed, which will be
maintained automatically.
Note:
It is possible to accelerate
momentarily without disarming the
cruise control.
01-07-2002
DRIVING YOUR 406 COUPE
Cancelling the memorised
speed
If you wish to cancel the memorised
speed:
Press button 4 or the brake or
clutch pedal.
Recalling the memorised
speed
After cancellation, press button 4.
Your vehicle will return to the last
memorised speed.

Changing a memorised speed

To memorise a speed higher than
the previous one:
speed pro-
press button 3;
release it when you have reached
the required speed.
To memorise a speed lower than the
previous one:
press button 2;
release it when you have reached
the required speed.
Cancelling the cruise control
place switch 1 in the OFF position
or switch off the ignition.
Do not use cruise control
on slippery roads or in
heavy traffic.
THE ABS ANTI-LOCK
BRAKING
SYSTEM
When used with approved tyres in
good condition, the ABS increases
the stability and manoeuvrability of
your vehicle, particularly on poor or
slippery road surfaces.
The anti-lock braking system comes
into operation automatically when
there is a risk of wheel lock.
The normal operation of the ABS
may make itself felt by slight
vibrations of the brake pedal.
In emergency braking, press
very firmly without releasing
the pressure.
EMERGENCY BRAKING
ASSISTANCE SYSTEM
In an emergency, this
enables the optimum braking pres-
sure to be reached more quickly,
thus reducing the stopping distance.
It is triggered according to the speed
of activation of the brake pedal. The
effect of this is a reduction in the
resistance of the pedal and an
increase in braking efficiency.
system