JVC HR-XVS44U Instructions Manual page 78

78
EN
8 2ND AUDIO RECORD
ON
OFF
8 AUDIO MONITOR
HI-FI
HI-FI L
HI-FI R
NORM
MIX
When this function is set to "ON";
If a SAP program is received, the SAP audio is recorded on both the normal and
Hi-Fi tracks. The main audio is not recorded.
If a non-SAP program is received, the main audio is recorded on both the Hi-Fi
and normal tracks.
When this function is set to "OFF", the SAP audio cannot be recorded.
NOTES:
When the channel is changed on the unit;
The "STEREO" indicator appears on the screen for about 5 seconds if the program is a
stereo broadcast.
The "SAP" indicator appears on the screen for about 5 seconds if the program is a SAP
broadcast.
Both indicators appear when a stereo program is accompanied by SAP sound.
This unit can record two sound tracks simultaneously (normal and Hi-Fi) on a
Hi-Fi stereo tape. You can select the sound track(s) to listen to while playing
back a Hi-Fi stereo tape. In addition, when playing back a prerecorded tape
containing two separate audio programs on the Hi-Fi tracks, you can choose
either one by selecting either "HI-FI L" or "HI-FI R".
HI-FI: Normally select this. Hi-Fi sound is played back.
HI-FI L: Sound on the left Hi-Fi channel is played back.
HI-FI R: Sound on the right Hi-Fi channel is played back.
NORM: Sound on the normal track is played back.
MIX: Both sounds on the Hi-Fi track and normal track are mixed
and played back.
NOTES:
While playing back a monaural tape, sounds on the normal track will be heard
regardless of this setting.
You can also use the A.MONITOR button on the Remote to select the desired monitor
sound. ( pg. 31)
SUBSIDIARY SETTINGS (cont.)
* The default setting is bold in the table below.