Spark Plug Replacement; Storing The Product - Ryobi RLT30CESA Operator's Manual

CLEANING AIR FILTER SCREEN
See Figures 28 - 29.
For proper performance and long life, keep air fi lter screen
clean.
Remove the air fi lter cover by pushing down on the latch
n
with your thumb while gently pulling on the cover.
Brush the air fi lter screen lightly to clean.
n
Replace the air fi lter cover by inserting the tabs on the
n
bottom of the cover into the slots on the air fi lter base;
push the cover up until it latches securely in place.
FUEL CAP
WARNING
A leaking fuel cap is a fire hazard and must be
replaced immediately.
The fuel cap contains a non-ser vice able filter and a
check valve. A clogged fuel fi lter will cause poor engine
per for mance. If per for mance improves when the fuel cap
is loos ened, check valve may be faulty or fi lter clogged.
Re place fuel cap if required.

SPARK PLUG REPLACEMENT

This engine uses a Champion RCJ-6Y or NGK BPMR7A
spark plug with .05 in. elec trode gap. Use an exact re-
place ment and replace annually.

STORING THE PRODUCT

Clean all foreign material from the product. Store idle unit
n
indoors in a dry, well-ventilated area that is in ac ces si ble
to chil dren. Keep away from cor ro sive agents such as
garden chem i cals and de-icing salts.
Abide by all ISO and local regulations for the safe
n
storage and handling of gasoline.
When storing 1 month or longer:
Drain all fuel from tank into a container ap proved for
n
gasoline. Run engine until it stops.
MAINTENANCE
LATcH
PuLL cOVER
TO OPEn
AIR fILTER
cOVER

AIR fILTER
cOVER
fILTER ScREEn
Fig. 8
LATcH
Fig. 9