Creative ZEN User Manual page 23

Performing a Manual Scan
1. Connect your earphones to the earphone jack.
Your earphones act as an antenna and must be connected to your player to receive radio signals.
2. On the main menu, select FM Radio.
3. Press , and then press
To return to FM Radio screen, press
4. Press and hold or
Press or to fine-tune the frequency.
5. Press and select Save as Preset.
6. Select an empty preset denoted by "--.-- MHz".
If you have selected an existing preset, you will be prompted to confirm that you want to replace the current preset.
to switch from Preset Tuning to Manual Tuning.
.
to scan for the next available radio station.