Garmin GNC 420A Installation Manual page 86

400 series
Hide thumbs Also See for GNC 420A:
Table of Contents

Advertisement

CHANNEL INPUTS
Selection
Off
Arnav/ei-fuel
Crossfill
GDL 49
Icarus-alt
Ryan TCAD
Shadin-adc
Shadin-alt
Shadin-fadc
Shadin-fuel
WX-500
CHANNEL OUTPUTS
Selection
Off
Aviation
Avtn no alt
Crossfill
HW EGPWS
Ryan TCAD
WX-500
FUEL TYPE
Selection
AV gas
Jet A
Jet B
Page 5-4
Page Rev L
Description
No unit(s) connected to input of this channel.
Serial fuel flow information from the following units:
ARNAV FC-10, FT-10
Electronics International FP-5L
Serial transfer of flight plans and user waypoints between two 400 Series
units. If Crossfill is selected for a channel output, then Crossfill is
automatically selected for that channel's input.
Serial data input for in-flight access to weather and messaging.
Serial altitude data from the following units:
Garmin GTX 327, Icarus Instruments 3000
Traffic information from a Ryan TCAD 9900B Series system.
Serial air data information from the following units:
Shadin ADC 200, 200+, 2000
Serial altitude data from the following units:
Shadin 8800T, 9000T, 9200T
Serial air data and fuel flow information from the following units:
Shadin 9628XX-X Fuel/Air Data Computer
Serial fuel flow information from the following units:
Shadin 91204XM Digital Fuel Management System
Shadin 91053XM Digital Fuel Management System
JP Instruments EDM-700 or EDM-760 Engine Monitor
Lightning strike information from a BF Goodrich WX-500 Stormscope.
Description
No unit(s) connected to output of this channel
Serial position, altitude, velocity, and navigation data to the following units:
GARMIN GPSMAP 195 or GPS III Pilot
Argus 3000, 5000, or 7000 Moving Map
Electronics International FP-5L Fuel Flow Computer (non-TSO'd)
JP Instruments EDM-700 or EDM-760 Engine Monitor
Shadin 91204XM Digital Fuel Management System
Shadin 91053XM Digital Fuel Management System
Shadin 9628XX-X Fuel/Air Data Computer
Stormscope Series II (with Navaid) Moving Map
GARMIN GDL 49 Satellite data link transceiver
GARMIN GTX 327 Transponder
Serial position, velocity, and navigation data to the following units:
Horizon DDMP
Serial transfer of flight plans and user waypoints between two 400 Series
units
Serial communication to a Bendix/King (Honeywell) KGP 560 EGPWS.
Serial communication with a Ryan TCAD 9900B Series system.
Serial communication to a BF Goodrich WX-500 Stormscope.
Description
The aircraft is using Aviation gas (5.8 lbs./gal.)
The aircraft is using Jet A or Jet A-1 fuel (6.7 lbs./gal.)
The aircraft is using Jet B (JP-4) fuel (6.5 lbs./gal.)
400 SERIES INSTALLATION MANUAL
P/N 190-00140-02

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gns 430aGns 430

Table of Contents