Table of Contents
Advertisement
Continued
Programing the Playing Order of the Tracks
— Program Play
You can arrange the order in which the tracks play before
you start playing. You can program up to 32 tracks.
1
Insert an MD.
• If the current playing source is not the MD, press
6 (play/pause) button on the MD recorder, then
7 (stop) button before going to the next step.
2
Press PLAY MODE button repeatedly until "MD
PROGRAM" appears in the display window.
• Each time you press the button, playback mode
indicators also change as follows:
PROGRAM
3
Rotate MULTI JOG dial to select a track number to
be programed (< / > button also available).
Track number
4
Press SET button to enter selected track number to
be program-played.
Track number
Here the track number 2 of the MD is stored into a
program number 1, and shortly after that the total
playback time of programed tracks appears in the display
window as follows:
5
Repeat steps 3 to 4 to program other tracks you
want up to 32 tracks.
9
RANDOM
Canceled
(Normal play)
Program number
Program number
Total playback time
• If you try to program a 33rd step
"MEMORY FULL" will appear in the display
window, and your entry is ignored.
• The total playback time of programed tracks
exceeds 99'59"
"– – : – –" will appear in the display window.
6
Press 6 (play/pause) button on the MD recorder.
The programed tracks are played back in the order you
have set.
7
Press 7 (stop) button to quit Program play.
• When Program play finished, MD recorder auto-
matically stops.
To check the program contents
Before playing back the MD, you can check the program
contents by using 4 / ¢ button.
Press ¢ button:
Shows the programed tracks in the programed
order.
Press 4 button:
Shows them in the reverse order.
To modify the program
Before playing back the MD, you can erase the last
programed track by pressing CANCEL button. Each time
you press the button, the last programed track is erased from
the end of program.
• To add new tracks to the program before you start
playing-back, simply select a track number again you
want to add (repeat steps 3 to 4).
To erase all the programed data
After playing back the MD, you can erase all the programed
track data by pressing 7 (stop) button. New program can
be entered again.
To exit from Program play mode
Before or during playback, you can exit from Program play
mode as follows:
• Before playback, press PLAY MODE button twice.
• During playback, press 7 (stop) button then PLAY MODE
button twice.
Playback mode indicator goes off and the system resumes
Normal play mode.
Pressing 0 0 0 0 0 (eject) button to eject the MD also quits
Program play mode.
Advertisement
Table of Contents
