Checking The Station Type Of Pty Programme; Eon Function; Stereophonic Stations; Menu - Fiat Punto Sound System Manual

To change the type of PTY proceed as fol-
lows:
❒ press one of the 6 preset buttons;
or
❒ press buttons ¯ or ˙.
To store the current type of programme
on one of the 6 preset buttons, give a pro-
longed press on the preset button. Stor-
age is confirmed by a "beep". To seek a
station with this programme see the "Au-
tomatic tuning" and "Scanning stations
(Scan function)" paragraphs.
If no station is available with this type of
programme the system sounds a "beep",
the station selected previously is heard
and for 2 seconds the display shows the
wording "CHOSEN PTY NOT FOUND".
To turn the PTY function off, briefly press
button PTY again: the display will show the
last information (frequency, etc...) active
before the PTY function.
20
CHECKING THE STATION TYPE
OF PTY PROGRAMME
To know the type of PTY programme of
the station heard, keep button PTY
pressed until a beep is heard. After the
beep the display will show the type of pro-
gramme offered by the station tuned. If the
station has no PTY code, the display will
show the wording "NO PTY PROVID-
ED". After a few seconds the display will
again show the RDS name or frequency of
the station tuned.

EON FUNCTION

(Enhanced Other Network)
Certain countries have circuits which
group together several stations enabled to
broadcast traffic information. In this case
the programme of the station being heard
will be interrupted temporarily:
❒ to receive traffic information (only with
TA function on);
❒ to listen to regional programmes every
time these bulletins are given by one of
the stations of the same circuits.

STEREOPHONIC STATIONS

If the signal received is weak, the device
switches automatically from Stereo to
Mono.

MENU

MENU-PS button functions

To activate the menu function, briefly
press button MENU-PS. The display
shows the word "MENU".
To scroll the menu functions use buttons
N or O. To change the setting of the se-
lected function use buttons ¯ or ˙.
The display will show the current status
of the function selected.
The functions controlled by the menu are
the following:
❒ PRESET/USER/CLASSIC/ROCK/JAZZ
(turning on/off and choosing predefined
equalizer adjustments);
❒ USER EQ SETTING (equalizer setting,
only if the equalizer setting has been se-
lected);
❒ REGIONAL MODE (regional pro-
grammes);
❒ CD DISPLAY (CD data display);
❒ MP3 DISP (MP3 CD data display);
❒ CDC DISPLAY (CD Changer data dis-
play, if installed);
❒ SENSITIVITY (tuning sensitivity);