The Front Panel - Dell SuperMassive 9200 Getting Started Manual

The Front Panel

Console Port
Access the SonicOS Command Line Interface
(CLI) via the enclosed serial CLI cable
Control Buttons
Navigates the LCD screen; for
future use
LCD Screen
Display screen for future use
SonicWALL SuperMassive 9200
USB Ports (2)
For 3G/4G/Analog modem adaptor support
Reset Button
Press and hold for several seconds to set the appliance
into Safe Mode.
LED Indicators
Power : Blue: Indicates power supplies are operating correctly
Yellow: Indicates a disconnected power supply
Test : Quick Blinking Yellow: Initializing
Slow Blinking Yellow: SafeMode
Solid Yellow: Test mode
Alarm : Indicates alarm activity in Red LED
M0: Indicates Expansion Module 0 activity in Red LED
SDHC Port
Secure Digital High-Capacity (SDHC) port for
future use
MGMT Port (1 GE)
1 Gigabit Ethernet Management Interface
10GE
X18 X16
SDHC
M0
ALARM
TEST
PWR 1 PWR 2
X19 X17
CONSOLE MGMT
X16-X19 (10 GE SFP+)
10 Gigabit Ethernet hot-pluggable ports
*X16, X18, and X19 are designated with a 'dot' to signify
ports with a direct uplink to the appliance CPU for maximum
throughput; X17 shares the CPU uplink with X0-X14.
Bypass Status
Turns on when fail-to-wire
bypass mode is active
1GE 1GE
X14 X12 X10 X8 X6 X4 X2 X0
X15 X13 X11 X9 X7 X5 X3 X1
X0-X7 (1 GE)
High-speed copper Gigabit
Ethernet ports
X9-X14 (1 GE SFP)
1 Gigabit Ethernet hot-pluggable SFP
interfaces for high-speed fiber or copper
Ethernet communication
BYPASS
STATUS
7